MAB-D28*## – 高速/高寿命系列

thumbnail
thumbnail

MAB-D28*## – 高速/高寿命系列

  • (※)Please add -03 to the end of the model number when ordering cables 200mm long.

马达特性

项目 单位 机种
MAB-D28H10
MAB-D28R10
MAB-D28N10
MAB-D28H30
MAB-D28R30
MAB-D28N30
行程 mm 10 30
定额推力 kgf 5 5
瞬间最大推力 kgf 10 10
分辨度 μm 0.5 0.5
最高速度 mm/s 50 50
主轴螺纹间隔 mm 1 1
一方向重复精度 μm 3 3
往返重复精度 μm 5 8
往返定位精度 μm 10 20
平均逆转误差 μm 3 5
限度感应器 霍尔传感器
尺寸 (L) mm 95 115
重量 g 430 480
外径 mm φ 28 φ 28

(Note*1)Use the included nuts when installing onto device. Restricting the body during attachment may lead to decreases in precision.

(Note*2)Actuators bear the loads of both the direction in which it thrusts and the direction in which it pulls. Please make sure to add precompression load to one of these directions before use, using equipment such as springs. Backlash will occur if precompression load is not in place, leading to decrease in precision. During pre-shipping inspections, we placed 800gf of compression load on the thrust direction when performing precision measurement.

(Note 3)Actuator cables are not flex-resistant. Please contact us if you plan to use them in situations where repetitive flex stress is to be applied to the product.

(Note 4)The positioning of the M3 attachment screw holes and cables can be arbitrarily determined.

Page Top