MALS-D18*## -标准系列 / 廉价系列
MALS-D18*## -标准系列 / 廉价系列
- (Note)When installing screws on the N type with screwholes, please make sure less than 1Nm of torque is placed upon the actuator rod. If the torque placed upon this part exceeds 1Nm, this will negatively affect the precision of the actuator.
- （※）Please add -03 to the end of the model number when ordering cables 200mm long.
马达特性
| 项目 | 单位 | 机种 | ||
|---|---|---|---|---|
| MALS-D18H06 MALS-D18R06 MALS-D18N06 |
MALS-D18H10 MALS-D18R10 MALS-D18N10 |
MALS-D18H20 MALS-D18R20 MALS-D18N20 |
||
| 行程 | mm | 6 | 10 | 20 |
| 定额推力 | kgf | 1.5 | 1.5 | 1.5 |
| 分辨度 | μm | 0.5 | 0.5 | 0.5 |
| 最高速度 | mm/s | 4 | 4 | 4 |
| 主轴螺纹间隔 | mm | 0.4 | 0.4 | 0.4 |
| 一方向重复精度 | μm | 10 | 12 | 15 |
| 往返重复精度 | μm | 15 | 17 | 20 |
| 往返定位精度 | μm | 30 | 35 | 50 |
| 平均逆转误差 | μm | 10 | 10 | 15 |
| 限度感应器 | – | 霍尔传感器 | ||
| 尺寸 (L) | mm | 63 | 67 | 77 |
| 重量 | g | 165 | 170 | 175 |
| 外径 | mm | φ 18 | φ 18 | φ 18 |
- (Note*1)Use the included nuts when installing onto device. Restricting the body during attachment may lead to decreases in precision.
- (Note*2)Actuators bear the loads of both the direction in which it thrusts and the direction in which it pulls. Please make sure to add precompression load to one of these directions before use, using equipment such as springs. Backlash will occur if precompression load is not in place, leading to decrease in precision. During pre-shipping inspections, we placed 800gf of compression load on the thrust direction when performing precision measurement. Finally, please make sure the load placed on the pull direction during assembly does not exceed the rated thrust.
- (Note 3)Actuator cables are not flex-resistant. Please contact us if you plan to use them in situations where repetitive flex stress is to be applied to the product.
- (Note 4)The encoder specifications for this product are 2ch and do not include Z pulse.
- (Note 5)Please see the page covering terms for the positioning of the point of origin.
