EA-2565
EA-2565
马达特性
| 项目 | 单位 | 机种 | ||||
|---|---|---|---|---|---|---|
| EA-2565 | ||||||
| 定额输出 | W | 12.0 | ||||
| 定额扭矩 | mNm | gf-cm | oz-in | 23.54 | 240 | 3.33 |
| 定额回转速度 | rpm | 5000 | ||||
| 瞬时最大转矩 | mNm(gf-cm) | 58.8 (600) | ||||
| Power rate | w/s | 740 | ||||
| 扭矩 | mNm/A | 26.7 | ||||
| 逆起电压 | V/krpm | 2.8 | ||||
| 极数 | – | 2 | ||||
| 转动惯量 (GD2/4) | g-cm2 | 7.5 | ||||
| 绝缘等级 | – | Class F | ||||
| 编码器 | P/R | 增量型 photoencoder 1000 or 2000 | ||||
| 工作温度,湿度 | – | 0 to 40℃, less than 85% RH (no condensation) | ||||
| 保管温度,湿度 | – | -20 to 60℃, less than 85% RH (no condensation) | ||||
| 重量 | g | 230 | ||||
| 3DCAD | STEP. | |||||
注 Characteristics assume aluminum heat sink (57 x 57, 5t) has been installed onto the motor flange.
SFP 系列 行星减速器 (可选)
| 減速比 | 5.43 | 20.73 | 29.47 | 79.24 | 112.52 | 160.00 | 302.15 | 429.63 | 610.82 | ※868.44 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 定额扭矩 | N・m | 0.118 | 0.392 | 0.559 | 1.363 | 1.932 | 2.746 | 4.697 | 6.678 | 9.493 | 9.807 |
| oz-in | 16.66 | 55.55 | 79.16 | 193.03 | 273.58 | 388.84 | 665.20 | 945.72 | 1344.28 | 1388.72 | |
| 定额回转速度 | rpm | 921 | 241 | 170 | 63.1 | 44.4 | 31.3 | 16.5 | 11.6 | 8.2 | 5.8 |
| 尺寸 (L) | mm | 36.5 | 43.8 | 43.8 | 53.5 | 53.5 | 53.5 | 63.8 | 63.8 | 63.8 | 63.8 |
(Note*1) If using deceleration ratios marked with an asterisk (*), please make sure not to exceed the allowable output torque of the gearhead.
(Note*2) Values assume continual operation under an evenly distributed load.
