BD-26500
BD-26500
※← Please click here for
‘Detail of the Data’.
Note*1： ‘Data’ indicates the specifications while
aluminum board (size: 71*71*5t) is attached to the motor flange.
Please see ‘Detail of the Data’ above for
more information.
Note*2：Gearhead and/or encoder can be mounted to the motor as option. Please see the specifications below for more information.
- Motor Specifications
- With Encoder
- With ZAP Gearhead
Motor Specifications
| Item | Unit | Model | |
|---|---|---|---|
| BD-265001 | BD-265002 | ||
| Number of poles | Pole | 2 | 2 |
| Power source voltage | V | 24 ± 5% | 24 ± 5% |
| Line resistance | Ω | 3.1 | 13.7 |
| Torque constant | mN-m/A | 21.2 | 43.7 |
| Back EMF constant | V/K rpm | 2.22 | 4.58 |
| No Load Speed | rpm | 11200 (Note*1) | 5500 (Note*1) |
| Max continuous current | A | 1.7 (Note*1) | 0.8 (Note*1) |
| Maximum continuous torque | mNm | 30.2 (Note*1) | 29.7 (Note*1) |
| Rated Speed | rpm | 8300 (Note*1) | 2600 (Note*1) |
| Rated output | W | 26.2 (Note*1) | 8.1 (Note*1) |
| Rotor inertia | g・cm2 | 7.0 | 7.0 |
| Weight | g | 140 | 140 |
| Drivers | BSD-36-＊＊＊＊ (Max speed) |
1024-△ 007 ( 5000 rpm ) |
1024-△ 008 ( 5000 rpm ) |
Note*1: This value depends on a specification of driver
and encoder.
Note*2: The maximum speed of the standard type driver,
BSD-36 Series, is 5,000 rpm but it can be customized to over 5,000 rpm. Please send us “Inquiry Form” or
“Special Order Form” on Contact Page for
more details on custom order.
- Motor Specifications
- With Encoder
- With ZAP Gearhead
With Encoder
| Encoder Type | Magnetic incremental type | |
|---|---|---|
| Item | Unit | Encoder’s Speciftication |
| Power source voltage | V cc | DC +5V±7% |
| Current Consumption | mA | 30 |
| Output voltage | V | High ≧ 3.5 Low ≦ 1.0 |
| Maximum output current | mA | 10 (max.) |
| Number of channels | ch | 3 (A,B,Z) |
| Maximum response frequency | kHz | 700 |
| Output pulse number | – | Can use Line Driver Output and/or TTL Output |
| Output pulse number | Pulse/Rev | 512 |
- Motor Specifications
- With Encoder
- With ZAP Gearhead
With ZAP Gearhead
Rated Characteristic of Motor with Gear(s)
BD-265001G ZAP 1/xxx
| Reduction ratio | 4 | 6 | 16 | 24 | 36 | 64 | 96 | ※144 | ※216 | 256 | ※384 | ※576 | ※864 | ※1296 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Maximum continuous torque | N・m | 0.103 | 0.154 | 0.348 | 0.522 | 0.783 | 1.179 | 1.769 | 2.000 | 2.000 | 4.020 | 4.800 | 4.800 | 4.800 | 4.800 |
| Rated Speed | rpm | 1209 | 806 | 275 | 183 | 122 | 65 | 43 | 38 | 38 | 15 | 13 | 13 | 10 | 6 |
| Rated output | W | 13.0 | 13.0 | 10.0 | 10.0 | 10.0 | 8.0 | 8.0 | 8.0 | 8.0 | 6.5 | 6.5 | 6.5 | 4.8 | 3.2 |
| Length L | mm | 29.9 | 29.9 | 35.3 | 35.3 | 35.3 | 44.0 | 44.0 | 44.0 | 44.0 | 52.7 | 52.7 | 52.7 | 52.7 | 52.7 |
BD-265002G ZAP 1/xxx
| Reduction ratio | 4 | 6 | 16 | 24 | 36 | 64 | 96 | ※144 | ※216 | 256 | ※384 | ※576 | ※864 | ※1296 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Maximum continuous torque | N・m | 0.101 | 0.151 | 0.342 | 0.513 | 0.770 | 1.159 | 1.739 | 2.000 | 2.000 | 3.954 | 4.800 | 4.800 | 4.800 | 4.800 |
| Rated Speed | rpm | 650 | 433 | 163 | 108 | 72 | 41 | 27 | 18 | 12 | 10 | 7 | 5 | 3 | 2 |
| Rated output | W | 6.9 | 6.9 | 5.8 | 5.8 | 5.8 | 4.9 | 4.9 | 38 | 2.5 | 4.2 | 3.4 | 2.3 | 1.5 | 1.0 |
| Length L | mm | 29.9 | 29.9 | 35.3 | 35.3 | 35.3 | 44.0 | 44.0 | 44.0 | 44.0 | 52.7 | 52.7 | 52.7 | 52.7 | 52.7 |
Note*1: If using Reduction ratio marked with an
asterisk (*), please make sure not to exceed the allowable output torque of the gearhead.
Note*2: These are the values in uniform
load.
